Online courses directory (2511)

The Experimental Project Lab in the Department of Aeronautics and Astronautics is a two-semester course sequence: 16.621 Experimental Projects I (this course) and 16.622 Experimental Projects II. This site offers material on 16.621. In the course, two-person teams initiate a project of their own conception and design in 16.621 and then complete it in 16.622. For many students, this is a first encounter with research standards and techniques. It is a complicated course that requires a lot of interaction and support and also access to facilities and materials, but it is rewarding for students to explore an hypothesis under the guidance of a faculty advisor.

This OCW site presents the building block materials of the course, which can provide only a profile of the course because the most important learning elements are the interactions between student team, faculty, project advisor, and shop staff and also between student team members. However, this site offers some of the preparation and guidance materials for students embarking on an experimental project. To emphasize the focus on communication skills, a set of study materials and examples of student work are provided.

This course introduces the various aspects of present and future Air Traffic Control systems. Among the topics in the present system that we will discuss are the systems-analysis approach to problems of capacity and safety, surveillance, including the National Airspace System and Automated Terminal Radar Systems, navigation subsystem technology, aircraft guidance and control, communications, collision avoidance systems and sequencing and spacing in terminal areas. The class will then talk about future directions and development and have a critical discussion of past proposals and of probable future problem areas.

General introduction to systems engineering using both the classical V-model and the new Meta approach. Topics include stakeholder analysis, requirements definition, system architecture and concept generation, trade-space exploration and concept selection, design definition and optimization, system integration and interface management, system safety, verification and validation, and commissioning and operations. Discusses the trade-offs between performance, lifecycle cost and system operability. Readings based on systems engineering standards and papers. Students apply the concepts of systems engineering to a cyber-electro-mechanical system, which is subsequently entered into a design competition.

Students will prepare a PDR (Preliminary Design Review)-level design intended for the Cansat Competition.This year's class will be taught in the form of a Small-Private-Online-Course (SPOC) and offered simultaneously to students at MIT under number 16.842 and Ecole Polytechnique Fédérale de Lausanne (EPFL) as ENG-421.

Satellite Engineering introduces students to subsystem design in engineering spacecraft. The course presents characteristic subsystems, such as power, structure, communication and control, and analyzes the engineering trades necessary to integrate subsystems successfully into a satellite. Discussions of spacecraft operating environment and orbital mechanics help students to understand the functional requirements and key design parameters for satellite systems.

ERBA (ESD.72) emphasizes three methodologies - reliability and probabilistic risk assessment (RPRA), decision analysis (DA), and cost-benefit analysis (CBA). In this class, the issues of interest are: the risks associated with large engineering projects such as nuclear power reactors, the International Space Station, and critical infrastructures; the development of new products; the design of processes and operations with environmental externalities; and infrastructure renewal projects.

16.885J offers a holistic view of the aircraft as a system, covering: basic systems engineering; cost and weight estimation; basic aircraft performance; safety and reliability; lifecycle topics; aircraft subsystems; risk analysis and management; and system realization. Small student teams retrospectively analyze an existing aircraft covering: key design drivers and decisions; aircraft attributes and subsystems; and operational experience. Oral and written versions of the case study are delivered. For the Fall 2005 term, the class focuses on a systems engineering analysis of the Space Shuttle. It offers study of both design and operations of the shuttle, with frequent lectures by outside experts. Students choose specific shuttle systems for detailed analysis and develop new subsystem designs using state of the art technology.

There is need for a rigorous, quantitative multidisciplinary design methodology that works with the non-quantitative and creative side of the design process in engineering systems. The goal of multidisciplinary systems design optimization is to create advanced and complex engineering systems that must be competitive not only in terms of performance, but also in terms of life-cycle value. The objective of the course is to present tools and methodologies for performing system optimization in a multidisciplinary design context. Focus will be equally strong on all three aspects of the problem: (i) the multidisciplinary character of engineering systems, (ii) design of these complex systems, and (iii) tools for optimization.

This course is a detailed technical and historical exploration of the Apollo project to "fly humans to the moon and return them safely to earth" as an example of a complex engineering system. Emphasis is on how the systems worked, the technical and social processes that produced them, mission operations, and historical significance. Guest lectures are featured by MIT-affiliated engineers who contributed to and participated in the Apollo missions. Students work in teams on a final project analyzing an aspect of the historical project to articulate and synthesize ideas in engineering systems.

A presentation of the fundamentals of modern numerical techniques for a wide range of linear and nonlinear elliptic, parabolic and hyperbolic partial differential equations and integral equations central to a wide variety of applications in science, engineering, and other fields. Topics include: Mathematical Formulations; Finite Difference and Finite Volume Discretizations; Finite Element Discretizations; Boundary Element Discretizations; Direct and Iterative Solution Methods.

This course was also taught as part of the Singapore-MIT Alliance (SMA) programme as course number SMA 5212 (Numerical Methods for Partial Differential Equations).

This course is an introduction to the cross-cultural study of bio-medical ethics. It examines moral foundations of the science and practice of western bio-medicine through case studies of abortion, contraception, cloning, organ transplantation, and other issues. It also evaluates challenges that new medical technologies pose to the practice and availability of medical services around the globe, and to cross-cultural ideas of kinship and personhood. It discusses critiques of the bio-medical tradition from anthropological, feminist, legal, religious, and cross-cultural theorists.

This course provides an exploration of colonial and postcolonial clashes between theories of healing and embodiment in the African world and those of western bio-medicine. It examines how Afro-Atlantic religious traditions have challenged western conceptions of illness, healing, and the body and have also offered alternative notions of morality, rationality, kinship, gender, and sexuality. It also analyzes whether contemporary western bio-medical interventions reinforce colonial or imperial power in the effort to promote global health in Africa and the African diaspora.

This course uses scale models to design environments that orchestrate contrasting material properties and conventional constructional systems to create places that foster specific ways of inhabiting space. It also demonstrates how architecture differs from other forms of design. Intended for students to test aptitude for architectural design and to experience an unfamiliar mode of thought, it's conducted in a studio format, with lectures on architectural theory and history, and structured for students with no previous experience in design.

Required of Architecture majors.

This class investigates the theory, method, and form of collage. It studies not only the historical precedents for collage and their physical attributes, but the psychology and process that plays a part in the making of them. The class was broken into three parts, changing scales and methods each time, to introduce and study the rigor by which decisions were made in relation to the collage. The class was less about the making of art than the study of the processes by which art is made.

This course covers theories about the form that settlements should take and attempts a distinction between descriptive and normative theory by examining examples of various theories of city form over time. Case studies will highlight the origins of the modern city and theories about its emerging form, including the transformation of the nineteenth-century city and its organization. Through examples and historical context, current issues of city form in relation to city-making, social structure, and physical design will also be discussed and analyzed.

This subject explores the varied nature and practice of computation in design. We will view computation and design broadly. Computation will include both work done on the computer (digital computing) and by-hand. Design will include both the process of making designs and artifacts, as well as the designs and artifacts themselves. The aim of the course is to develop a view of computation and design beyond the specifics of techniques and tools, and a critical, self-awareness of our own approaches and metaphors for computation and design.

In this seminar, students will design and perfect a digital environment to house the activities of large-scale organizations of people making bottom-up decisions, such as with citizen-government affairs, voting corporate shareholders or voting members of global non-profits and labor unions. A working Open Source prototype created last semester will be used as the starting point, featuring collaborative filtering and electronic agent technology pioneered at the Media Lab. This course focuses on development of online spaces as part of an interdependent human environment, including physical architectures, mapped work processes and social/political dimensions.

A cross-disciplinary approach will be taken; students with background in architecture, urban planning, law, cognition, business, digital media and computer science are encouraged to participate. No prior technical knowledge is necessary, though a rudimentary understanding of web page creation is helpful.

Furniture making is in many ways like bridge building, connections holding posts apart with spans to support a deck. Many architects have tried their hand at furniture design, Wright, Mies Van Der Rohe, Aalto, Saarinen, Le Corbusier, and Gerhy.

We will review the history of furniture making in America with a visit to the Decorative Arts Collection at the Museum of Fine Arts in Boston and have Cambridge artist/craftsman Mitch Ryerson show us his work and talk about design process. Students will learn traditional woodworking techniques beginning with the use of hand tools, power tools and finally woodworking machines.

Students will build a single piece of furniture of an original design that must support someone weighing 185 lbs. sitting on it 12 inches off the ground made primarily of wood. Students should expect to spend approximately 80 hours in the shop outside of class time.

Preregistered architecture students will get first priority but first meeting attendance is mandatory. Twelve student maximum, no exceptions.

This seminar engages in the notion of space from various points of departure. The goal is first of all to engage in the term and secondly to examine possibilities of art, architecture within urban settings in order to produce what is your interpretation of space.

The course aims at providing a fundamental understanding of the physics related to buildings and to propose an overview of the various issues that have to be adequately combined to offer the occupants a physical, functional and psychological well-being. Students will be guided through the different components, constraints and systems of a work of architecture. These will be examined both independently and in the manner in which they interact and affect one another.

In this class, concepts of building technology and experimental methods are studied, in class and in lab assignments. Projects vary yearly and have included design and testing of strategies for daylighting, passive heating and cooling, and improved indoor air quality via natural ventilation. Experimental methods focus on measurement and analysis of thermally driven and wind-driven airflows, lighting intensity and glare, and heat flow and thermal storage. Experiments are conducted at model and full scale and are often motivated by ongoing field work in developing countries.